Brother MFC-J875DW Ink

How to Change your Brother MFC J875DW Ink Cartridges Refill

1. Switch on your Brother J875DW printer by connecting it to a working power supply and pressing the Power Button.
2. Open your Brother MFC J875DW printer’s cartridge cover located on the right side of your printer, then locate the empty cartridge colors specified on the LCD screen.
3. Push down the empty cartridge’s lever to free the empty cartridge and gently remove the old unit from the carriage. Repeat this step with the other cartridges that need replacement.
4. Unpack the new cartridge by tearing off its cover from the sides and remove the unit's orange protective cap. Don’t touch the cartridge's nozzles or contacts.
5. Insert the new Brother J875DW ink cartridge gently into the matching slot. Make sure the cartridge color and sticker color match; every ink cartridge you install must align with the arrow on the label. Follow the same steps when installing the other Brother color ink cartridges.
6. Close the ink cartridge panel and check the LCD screen to verify if the ink cartridges were correctly installed. If not, remove the new ink cartridge from the carriage and reinstall it using the same steps.