No products were found matching your selection.
How to Change your Brother MFC J285DW Ink Cartridges Refill
- Make sure your Brother MFC J285DW printer is switched on. If it's not turned on yet, connect it to a suitable power supply and press the Power Button.
- Open the ink cartridge cover located on the right side of your printer’s front panel.
- Remove the empty cartridge specified on your machine’s LCD by turning its green knob clockwise until you hear a click and lifting the device straight up.
- Unpack the new Brother MFC J285DW ink cartridge by tearing off the plastic wrap and twist the yellow protective cap counterclockwise to remove it.
- Install the new ink cartridge by aligning it to the right, color-labeled slot and carefully pushing down until it locks into place.
- Repeat steps 4-7 for the other colored cartridges then close the ink cartridge cover once the installation is done.