Canon MX432 Ink

•Print Speed: 9.7 ppm Black / 5.5 ppm Color

•Maximum Print Size: 8.5" x 14"

•Print Resolution: 600 x 600 dpi (mono) / 4800 x 1200 dpi (color)

•Interface: Wireless LAN, USB 2.0

ManufacturerCanon
Printer SeriesCanon Pixma
Model 432
Consumables

1 x cartridge (black) - Canon PG-240

1 x cartridge (color) - Canon CL-241

WirelessYes
Mobile CapabilityApple AirPrint
InterfaceWireless LAN, USB 2.0
Media Typeenvelopes, photo paper, plain paper
Print Sizes8.5" x 14"
Printing Speed9.7 ppm Black / 5.5 ppm Color
Resolution600 x 600 dpi (mono) / 4800 x 1200 dpi (color)
 Automatic Sheet Feeder30 Sheets
 Dimension (W x D x H)18.1 (W) x 15.2 (D) x 7.9 (H)
Weight18.74 lbs

How do I set up my Canon mx432?

  1. Plug in the Printer and turn it on by long-pressing its power button
  2. Configure its settings from the control panel
  3. Load the cartridges and paper
  4. Download and Install its software or driver on your computer
  5. You have now successfully set up your Canon Pixma MX432

How do I scan with Canon mx432?

  1. Press Scan from your printer's control panel
  2. Choose the ideal document type 
  3. Modify scan settings using the right Function button 
  4. Place the original on the scanning surface or automatic document feeder (ADF)
  5. Press the Color or Black button depending on your needs
  6. Your MX432 will now start scanning

What kind of ink does a Canon mx432 use?

The Canon Pixma MX432 uses Canon PG-240 black ink cartridges and Canon CL-241 color ink cartridges. These cartridges are available in high yield options that deliver more pages for every round.

How do I change the ink in my canon mx432 printer?

  1. Push the power button of your MX432 to turn it on. 
  2. Gently open its cover to access the ink cartridges
  3. Push and pull upwards to remove the cartridge
  4. Load the replacement cartridge
  5. Close the cover

How do I reset my canon mx432 printer?

Access the printer’s Menu panel and go to Device Settings. Select Reset Setting then tap OK and your MX490 will start resetting to factory default settings. If you want to reset printer ink and cartridge, follow these instructions (“follow these instructions” will be linked to a separate content below).

Resetting Printer Ink (Link destination)

  1. Shut down your MX490 Printer
  2. Press down the Power button and the Stop button together at the same time.
  3. Let go of the Stop button while still maintaining your hold on the Power button before pressing the Stop button twice again
  4. After about half a minute, the Printer's display will show "O."
  5. Push the Stop button four times back before pressing the Power button twice
  6. Press and hold the Power button one last time to shut down the MX490 and finish the reset

Resetting Cartridge (Link Destination)

  1. Unplug the power and USB chords of your MX490
  2. Open the cartridge door while pressing the Power button
  3. Plug back the power chords while still pushing the Power button
  4. Close the door back and release the Power button

Download Canon Pixma MX432 Drivers Here.

Showing all 4 results

Tired of spending a significant amount of your supply budget on costly name brand ink? YoYoInk is here to offer you a variety of low-cost alternatives, specifically designed for your Canon Pixma MX 432. Our remanufactured cartridges for the Canon Pixma MX 432 are original Canon ink cartridges that have gone through only one cycle of service, later on rebuilt with mostly new parts. Each cartridge is rigorously tested to ensure professional quality print and page yields comparable to the original Canon Ink cartridges.