Brother MFC L2680W Toner

How to Change Your Brother MFC-L2680W Toner Cartridges

Reminders: Be sure the machine is on.

1. Gently pull up the front cover to open it.

2. Remove the toner cartridges and drum units from the printer.
   
   
3. Push the green lock lever down and pull the toner cartridges from the drum unit.
   
   
4. Get the new toner cartridge and put it carefully into the drum unit until it locks into place.
   
   
5. Make sure the toner cartridge is set correctly, so it doesn’t detach from the drum unit.
   
   
6. Clean the drum unit’s corona wire by carefully skimming the green tab sideward multiple times. Make sure the tab is returned at the Home position. The tab’s arrow should be in line with the drum unit’s arrow. If not, the printed pages may contain a vertical stripe.
   
   
7. Put the toner cartridge and drum back into the printer.
   
   
8. Close the machine’s front cover.
   
   

Reminders: After the toner cartridge replacement, don’t turn off the unit or open its cover until the display is set to Ready Mode.

Recommended Cartridges for Brother MFC-L2680W Toner:
630, 660, TN630, TN660

Frequently Asked Questions for Brother MFC L2680W Toner Refill

1. What kind of toner cartridge does Brother MFC-L2680W use?

   The Brother MFC-L2685DW printer uses TN630 / TN660 Toner Cartridges just like Yoyoink’s Brother TN660 Toner Black Compatible Cartridge (High Yield) which can print up to 2,600 pages. Yoyoink also has a Brother DR630 Drum Unit Compatible Printer with a page yield of 12,000. Also, check out the Brother TN630 Black Compatible Toner Cartridge. All our Brother toner cartridge replacements are a cost-effective substitute for the standard models.