Brother HL-L6200DWT Toner

How to Change your Brother L6200DWT Toner Cartridges Refill

1. Make sure that the Brother L6200DWT is turned on by plugging it to a working power supply and pressing the Power button.
2. Open the machine’s top cover until it locks at the open position, then clutch the drum unit’s colored handle and pull it as far as it can go.
3. Push the green lock lever down and remove the toner cartridge from the drum unit.
4. Unpack the new Brother L6200DWT toner cartridge, then old the cartridge level with two hands and gently rock it sideways several times to spread the toner inside.
5. Peel out the device’s protective cover, then insert the new Brother L6200DWT toner cartridge into the drum unit until it clicks into place. Should you install it correctly, the drum unit and green lock lever will lift automatically.
6. Slide the drum unit’s blue tab from left to right several times before returning it to the home position. This will clean the corona wire.
7. Insert the drum unit back into the printer until it is seated securely.
8. Close the Brother L6200DWT printer’s top cover to finish the installation.