Brother DCP-J152W Ink

How to Change your Brother DCP J152W Ink Cartridges Refill

1. Turn your Brother printer on - attach it to a working power supply and press the Power Button.
2. Lift the machine's Ink Cartridge Cover. The LCD screen should show which ink cartridges are empty and need replacement. Take note and hit OK.
3. Press the Lock Release Lever down to separate the Ink Cartridge identified on the LCD. Lift the cartridge up while holding it at the sides to remove it from the slot.
4. Get the New Brother J152W In Cartridge Color indicated on the LCD and remove its protective Yellow Cap by twisting it counterclockwise.
5. Place the New Ink Cartridge into the vacant slot at the proper position as instructed on its label; with the colors matched and the chip facing the backside of the carriage.
6. Lift each Lock Release Lever and carefully push the cartridge gently downward into the slot until it locks firmly into place.
7. Follow the same procedure for every Brother ink cartridges you replace.
8. Close the Ink Cartridge Cover - the Ink Dot Counter will automatically reset the newly installed Brother printer inks.